Navigation-Menus (Do Not Edit Here!)

Monday, August 11, 2014

How To Stress Test CPU and memeory Using Linux (RedHat\Cent OS) System





This can be useful for

  • troubleshooting hardware/overheating issues
  • Testing new hardware changes, etc

In this case i wanted to stress test my Dell PE 2950 after modding it to reduce the fan noise - link


Details


Model - Dell PE 2950
OS - ESXI 5.5

I cannot get a lot of info from the exsi health monitor and i cannot run any pakages from the esxi shell.

I needed an effective way to test if decreasing the fan speeds have any negative effects on the system under heavy load.

I used a Cent OS 6.5 installed on to an old 8GB USB thumb drive (not live linux. i have it plugged in to the usb port on the server and its just a matter of changing the boot priority in bios to get it up and running)


Sadly there isn't a lot of options for Linux so finally, I ended up running Prime 95 and a few other monitoring tools to perform the task.

 
Packages and programs used


  • Prime 95 for Linux (Mprime) - link
  • lm_sensors - link
  • OpenIPMI-tools - link

Installing and usage of relevant packages

lm_sensors - link

Read sensory data such as – temperature of cpu cores and ram modules
sudo yum install lm_sensors

It is recommended to run the following command after installation
sudo sensors-detect #Carefully follow the prompts to configure the package

to start monitoring temperature
sensors


OpenIPMI-tools - link
yum install OpenIPMI OpenIPMI-tools
chkconfig ipmi on
service ipmi start

# Usage  Examples

# To check firmware version
ipmitool mc info

# Show sensor output
ipmitool sdr list
ipmitool sdr type list
ipmitool sdr type Temperature
ipmitool sdr type Fan
ipmitool sdr type 'Power Supply'

Prime 95 for Linux (Mprime) - link

This will max out all the cores on both sockets and test a lot of ram. This tool is one of my absolute favorites, when over clocking my gaming rig.
# download the package
wget http://mersenneforum.org/gimps/mprime2511.tar.gz

# Extract
tar zxw mprime2511.tar.gz

# run the program 
./mprime

Follow the on screen prompts to initiate the test, I used the “blend test”


Test environment

Room Ambient temp – 78* (AC was switched off)

Windows open for good air flow


TEST



I ran the prime95 blend test for 60 minutes and It was maxing out all 8 cores and pushing the system to the limit. If it goes through this without a hick up, it should hold up under normal use with no problems.


 I used the following commands with multiple ssh sessions


Monitor cpu usage
top













Process running time
watch ps -p "pid" -o etime=  

#"pid" - get the pid for prime95 from the “top“








Monitor the temperatures continuously
watch sensors
lm_sensors_output































Results

I didnt collect any logs but rather monitored the ssh sessions for any issues, but im happy to say that cpus and the ram modules held up pretty well with the fan mod under a lot of stress

Max temperature recorded was 87* and it went down after the fans spooled up. 




















So there you go. Leave comment and lets us know if you can add anything or correct anything I will update the post.


13 comments:

  1. Simply desire to say your article is as astounding. The clarity in your post is just great and i can assume you’re an expert on this subject. Fine with your permission let me to grab your feed to keep updated with forthcoming post. Thanks a million and please continue the gratifying work
    Regards: Eve Hunt

    ReplyDelete
  2. Incredible merchandise from you, man. I've comprehend your stuff past to and you are simply incredibly phenomenal. I truly like what you have obtained here, truly like what you are expressing and the manner by which you say it. You make it engaging you actually deal with to keep it delicate. I can hardly hold on to peruse undeniably more from you. This is actually a colossal site.

    ReplyDelete